Positioning The Flow Baffle - Toro GrandStand TURBO FORCE 74513 Operator's Manual

Figure 23
1. Slot

Positioning the Flow Baffle

The following figures are for recommended use only.
Adjustments vary by grass type, moisture content,
and the height of the grass.
Note:
If the engine power draws down and the
mower ground speed is the same, open the baffle.
Position A
This is the full, rear position (see
position for the following:
•
In short, light grass mowing conditions
•
In dry conditions
•
Smaller grass clippings
•
Propels grass clippings farther away from the
mower
Figure 24
g012676
2. Nut
Figure 24). Use this
g012677
Position B
Use this position when bagging
Position C
This is the full, open position
position for the following:
•
In tall, dense grass mowing conditions
•
In wet conditions
•
Lowers the engine-power consumption
•
Allows increased ground speed in heavy conditions
21
(Figure 25).
Figure 25
(Figure 26). Use this
Figure 26
g012678
g012679