Clutch 90% Switch Plausible Error - Mahindra Quanto Ems Diagnostic Manual

DIAGNOSTIC MANUAL
QUANTO
P172A
CLUTCH SENSOR
The clutch pedal sensor is a hall effect sensor encompassing two hall chips mounted on fixed part of the
clutch pedal and a magnet mounted on the moving shank of the clutch pedal
NORMAL OPERATION

Ignition ON

Whenever clutch 90% signal is received by EMS ECU , there
is a change in clutch status which is received thru 10 %
signal
DTC DETECTING CONDITIONS

Ignition ON

EMS ECU supply voltage 8-16V

Clutch 90% signal is received by EMS ECU continuosly
without change in clutch status l recived thru 10% signal
DTC REACTIONS

Strat stop function will not work
HEALING CONDITION

Ignition Off/On
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
EMS

CLUTCH 90% SWITCH PLAUSIBLE ERROR

DTC INFORMATION
MAN-00201
SEP 2012/Rev 1
PROBABLE CAUSES OF FAILURE

Short to battery in 90%
signal wire

Improper clutch pedal
sensor adjustment

Faulty clutch sensor
`
274