Replace Water Inlet Filter - Roche Cedex Bio System Operator's Manual

Hide thumbs Also See for Cedex Bio System:
Table of Contents

Advertisement

Cedex Bio System

Replace water inlet filter

Operator time
Prerequisites
Tools and materials required
Roche Diagnostics
Operator's Manual · Version 3.1
f
Utilities > Maintenance > Replace Water Inlet Filter
The water inlet filter in the external water container removes particulate matter from
the water supply. You must replace this filter according to the maintenance action
schedule.
The water container is placed on the rack next to the Cedex Bio instrument.
Approximately 10 minutes.
None
m Purified water
m Hypochlorite solution (0.6%)
m Tissues
m Water inlet filter
Make sure that you have read and understood section Safety information on page C-8.
The following warning messages in particular are relevant:
o
Injury through working solutions on page C-8.
a To replace the water inlet filter
1 Select the maintenance action Replace Water Inlet Filter.
2 Press
.
The maintenance definition screen is displayed.
3 Press
.
4 Remove the tubing adapter from the water container.
5 Place the tubing adapter on a clean surface.
8 General maintenance
Maintenance actions
C-19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cedex Bio System and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents