Short Guide - Roche Cedex Bio System Operator's Manual

Cedex Bio System

Short guide

Step
1
Start the Prepare wizard.
2
Check the status of the external
containers.
3
Perform the maintenance
actions that are due.
4
Prepare the reagent disk.
Table B-2 Steps for preparing the system
Roche Diagnostics
Operator's Manual · Version 3.1
The following table provides an overview of the steps that make up the preparation
process.
User action
1. On the Overview tab, press Prepare.
1. Refill the water container, if required, and con-
firm by pressing the water button. (If you refill
the water, empty the waste as well.)
2. Empty the waste container, if required, and
confirm by pressing the waste button.
3. Replace the cleaner bottle, if required, and con-
firm by pressing the cleaner button.
4. Press to proceed to the next stage in the
Prepare wizard.
1. Check which maintenance actions are due.
2. Perform the maintenance actions.
Perform at least all red maintenance actions.
3. Press to proceed to the next stage in the
Prepare wizard.
1. Open the main cover.
2. Remove the disk from its container.
3. Place the disk on the instrument.
4. Close the main cover.
A screen is displayed, showing the reagent sta-
tus.
5 Daily operation
Preparing the system
B-13