Introduction; Viewing Values; Changing Values; Configuration Introduction - Roche Cedex Bio System Operator's Manual

Cedex Bio System

Introduction

Viewing values

Changing values

Roche Diagnostics
Operator's Manual · Version 3.1
It is the users' sole responsibility to determine whether they activate the TRL Check fea-
ture, and if they do so to define the lower measuring range in accordance with the country
specific requirements. If the users activate the TRL Check feature, they are also responsi-
ble for validation of the ranges they define.
e
See Calculation definitions on page B-155 and Installing applications on page B-137.
The process for viewing and changing configuration and application values is the
same. The following procedures use the example of a calibration value.
a To view values
1 Choose Utilities > Applications > Laboratory Parameters.
2 Expand the list.
o
Select a list item marked with
o
Press .
o
Select a sublist item marked with
o
Press .
o
Use the scrollbar, if required, to display the items you are interested in.
The definition items and their current values are displayed.
If the change of a value results in one or several other values needing to be changed, a
wizard is started when you change the first value. You recognize a wizard by the
presence of the
a To change a value
1 Choose Utilities > Applications > Laboratory Parameters.
2 Expand the list to display the items and their values.
.
.
and buttons.
7 Configuration
Introduction
B-135