Emc Guidelines - Cardiac Science Burdick 8500 Product Safety Manual

EMC guidelines

WARNING! Electromagnetic interference.
Position the Burdick 8300/8500 away from other electrical or
electronic equipment, if possible. The presence of strong EMI
fields, or generated by RF noise on the line power, or by electronic,
surgical, or diathermy instruments in close proximity to the ECG
device may cause trace noise or input overload conditions.
If used with, or around, other electrical or electronic equipment,
always carefully monitor initial readings to verify normal
operation.
The Burdick 8300/8500 is compliant with IEC 60601-1-2 EMC
immunity requirements. Refer to
The Burdick 8300/8500 needs special precautions regarding
EMC and needs to be installed an put into service according to
the EMC information provided in this document.
Portable and mobile RF communications equipment can affect
the Burdick 8300/8500.
Essential Performance (as defined by 60601-1-2 section
6.8.3.201a 6) is the ability of an operator under the supervision
of a qualified physician trained in ECG interpretation to use the
Burdick 8300/8500 electrocardiograph to record the electrical
activity of the heart for the purpose of correlating the resultant
waveforms with the health of the heart muscle tissue structures.
The Burdick 8300/8500 is intended for use in the
electromagnetic environment specified below.
WARNING! Electromagnetic interference.
This system should not be used adjacent to or stacked with other
equipment except the Cardiac Science-approved accessories
listed in the accessories list.
70-01047-01 B
EMC guidelines
EMC guidelines on page 39.
39