To
Restore system
settings from a
USB drive
70-01047-01 B
Do this
Connect a USB drive containing an xml file with the system
1.
settings to a USB port on the back of the ECG device.
When using a USB device to import or export data,
Note:
ensure only one USB device is connected to the ECG
device.
Press Setup.
2.
Scroll to the Import/Export menu
3.
Select Import from USB.
4.
The system prompts you to enter the name of the file.
Enter the name of the system settings file.
5.
The default name is:
The system imports the settings to the USB drive. This
takes a few minutes. When the system restarts it is safe to
remove the USB drive.
Remove the USB drive.
6.
The settings on the ECG device are the same as the
imported settings file.
PhoenixSettings.xml
System setup
29