Cardiac Science Burdick 8500 Product Safety Manual page 24

Product Safety and Setup
Powering the ECG device on and off
Power on
Press On/Standby to power on the ECG device. The unit
performs self-tests and displays the Home screen.The system
may take two to three seconds to display the date and time.
Standby mode
The ECG device must be connected to AC power to go into
Standby mode. At any time during operation, press
On/Standby.
Note: The internal battery charges in Standby mode.
Power off
To power off the ECG device completely, disconnect the AC
power cord and then press On/Standby.
The automatic power down feature may be temporarily turned
off by changing the battery saver setting. For more information,
the User's Guide.
Note: Automatic power down is disabled when the ECG device is
connected to a patient.
Power indicator
A green light on the back of the ECG device (see Figure 1 on
page 1-21) is lit whenever the ECG device is receiving power
from the external power source.
24
70-01047-01 B