Cardiac Science Burdick 8500 Product Safety Manual page 21

Figure 1: Back panel
1 SDIO
a
2 USB
3 Network
4 Internal use
only
5 Equipotential
grounding
6 Power
indicator
7 External
power
connector
a
The ECG device conforms to all safety and essential performance standards. Every effort has been made to
ensure the ECG device is safe when used with systems containing other equipment. When the ECG device is
connected to another device using a USB cable, it is important to ensure the cable will not create excessive radio
frequency emissions. To minimize this risk, a ferrite USB cable emissions reducer kit is available as an accessory
(see the Accessories List for ordering instructions) and must be used with any USB cable connected to the ECG
device. Follow the installation instructions supplied with the ferrite USB cable kit.
70-01047-01 B
3
1 2
Reserved for future use.
Ports for connecting USB devices.
RJ-45 port for a network cable (wired network).
This is not a phone jack.
Note:
This port is reserved for Cardiac Science personnel. Do not
connect any cable or device to this port.
Connect equipotential ground cable here.
ground on page 17)
The green LED indicates the ECG device is connected to AC
power.
Connect cable from power external power supply here.
The ECG device does not have an AC power switch.
Note:
To shut off AC power, unplug the ECG device from the AC
outlet.
4 5 6 7
System setup
(Equipotential
21