System Battery Specifications; Expansion Card Riser Specifications; Memory Specifications; Storage Controller Specifications - Dell EMC PowerEdge R340 Installation And Service Manual

NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA.
Table 18. Dell EMC PowerEdge R340 fan support matrix
Front storage PSU type
8 x 2.5-inch Redundant 350
W
4 x 3.5-inch
8 x 2.5-inch Redundant 550
W
4 x 3.5-inch
Optional - .

System battery specifications

The Dell EMC PowerEdge R340 system supports CR 2032 3.0-V lithium coin cell system battery.

Expansion card riser specifications

The Dell EMC PowerEdge R340 system supports up to two PCI express (PCIe) generation 3.
Table 19. Expansion card slots supported on the system board
PCIe slot Riser
Slot 1 x8 PCIe
Slot 2 x16 PCIe
Internal PERC x8 PCIe

Memory specifications

The PowerEdge R340 system supports the following memory specifications for optimized operation.
Table 20. Memory specifications
DIMM type
UDIMM
Table 21. Memory module sockets
Memory module sockets
Four 288-pin

Storage controller specifications

The Dell EMC PowerEdge R340 system supports the following controller cards:
102 Technical specifications
Fan 1
Required, if the PERC
card and/or expansion
riser is installed
Required, if the PERC
card and/or expansion
riser is installed
PCIe slot height
Low-profile
Low-profile/Full-height
Low-profile
DIMM rank
Single rank
Dual rank
Fan 2
Required
Required
PCIe slot length
Half-length
Half-length
Half-length
DIMM capacity
8 GB
16 GB
8 GB
16 GB
Fan 3 Fan 4
Required Required
Required Required
Link width
x4
x8
x8
Minimum RAM
8 GB
16 GB
8 GB
16 GB
Speed
2666 MT/s
Slot width
x8
x16
x8
Maximum RAM
32 GB
64 GB
32 GB
64 GB