Supported Operating Systems; Psu Specifications; System Fan Specifications; System Battery Specifications - Dell EMC PowerEdge T40 Installation And Service Manual

Table 23. Processor Specifications
Supported processor
Intel Xeon E
Intel Core i3
Intel Pentium Gold
NOTE: Processor availability is subject to change and may vary by region/country.

Supported operating systems

The PowerEdge T40 supports the following operating systems:
• Microsoft Windows Server 2016
• Microsoft Windows Server 2019
• Ubuntu 18.04 LTS
NOTE: For more information, go to www.dell.com/ossupport.
NOTE: For more information about the specific versions and additions, go to https://www.dell.com/support/home/
Drivers/SupportedOS/poweredge-T40.

PSU specifications

The PowerEdge T40 system supports one cabled AC power supply unit (PSU).
Table 24. PSU specifications
PSU Class
300 W AC Bronze
NOTE: Heat dissipation is calculated by using the PSU wattage rating.
NOTE: The PowerEdge T40 system is also designed to connect to the IT power systems with a phase-to-phase voltage
not exceeding 240 V.

System fan specifications

The PowerEdge T40 system supports the following:
• One system cooling fan located at the top of the system.
• One processor cooling fan located on the heat sink.
NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA.

System battery specifications

The PowerEdge T40 system supports CR 2032 3.0-V lithium coin cell system battery.

Expansion card specifications

The PowerEdge T40 system supports up to three PCI express (PCIe) Generation 3 and once PCI card.
82 Technical specifications
Model
E series
i3-9100
G5400
Heat dissipation Frequency
(maximum)
1024 BTU/hr
50 – 60 Hz
UMA Graphics
Intel UHD Graphics P630
Intel UHD Graphics 630
Intel UHD Graphics 610
Voltage
100 – 240 V AC,
autoranging
Current
6A