Pressure Feedback Input - Bosch Rexroth Sytronix FcP 5020 Quick Start Manual

FcP 5020

7.4 Pressure Feedback Input

AI2 input is predefined as the pressure sensor input. User can select a different
type of pressure sensor and scaling factor. In case of Rexroth HM20 pressure
sensor is used the parameter F2.10 use for setting the installed HM20 pressure
sensor.
Fig. 7-6: Pressure feedback input
Code
Pressure feedback corresponding to
F2.06
10V or 20mA
F2.07 Pressure feedback null offset in V or mA 0.0...5.0 V, mA
F3.02 Filter time for pressure feedback
Tab. 7-3: Parameter list of pressure sensor feedback scaling
F2.06, F2.07: Scaling for pressure sensor feedback
Fig. 7-7: Pressure sensor feedback scaling
DOK-RCON03-FCP5020****-QU02-EN-P
Name
Block Diagram of Main Functions
Setting range Default
0.1...1,000.0 bar 100.0
(mA)
0...999 ms
Bosch Rexroth AG
Min. Attri.
0.1 Stop
4.0
0.1 Stop
4 1 Run
21/75