Led Flash Showing Converter Status - Bosch Rexroth Sytronix FcP 5020 Quick Start Manual

Bosch Rexroth AG
Block Diagram of Main Functions

7.11.4 LED Flash Showing Converter Status

Code Name
F2.36 DO1 output
F2.37 EDO output
Tab. 7-28: Parameter list of LED flash function
With active CytroPac functionality, the output is automatically configures to con-
trol the LED flash function. For normal status the light is always green, for warn-
ing condition the light will flash between green and yellow, and for error condi-
tion flash between red and yellow. The flash time of the yellow light represents
the warning / error type. More details refer to the following figure.
Fig. 7-24: LED flash function
52/75
Setting range
0: No function assigned from ASF
1: Converter warning
2: Green CytroPac flashing LED
3: Red CytroPac flashing LED
Default
See chapter 8.7
"Changed Setting
Parameter by Load
CytroPac Configu-
ration" on page
63
DOK-RCON03-FCP5020****-QU02-EN-P
FcP 5020
Attri.
Run
Run