DigiDesign D-Show Profile Manual page 41

Aux Sends
The Aux Sends section provides in/out and level control to
route the currently selected channel to any available mono or
stereo-linked Aux bus. The Aux Sends section is banked using
the Aux 1–8 or Aux 9–16 switches.
The Variable Groups switch accesses Variable Groups mode.
When D-Show is in Variable Groups mode, the controls for
Aux 1–2 through Aux 7–8 route to Variable Groups 1–2
through 7–8 respectively. The Variable Groups switch also au-
tomatically toggles the input encoders to Variable Groups 1–8
(instead of Auxes 1–8).
Variable Groups
Aux 1–8/Aux 9–16
Aux send controls
Insert Processing
The Insert Processing section provides controls to bypass and
select plug-ins on the currently selected channel.
Plug-Ins 1–4
In/Out
LED
Insert Processing controls
Selected Channel Meter, Display and LEDs
The Selected Channel display section include two 10-segment
Selected Channel meters, a 6-character LCD display and LEDS
for Status and Solo state.
Meters
Selected Channel meters, displays and LEDs
Send 1–16
encoders and
LEDs
Select
LCD Display
LEDs
The 6-character Selected Channel display shows the name of
the currently selected channel. The Selected Channel display
temporarily reverts to a parameter display mode any time an
encoder is adjusted on the selected channel.
The Stereo LED lights solid when a stereo input or output is
targeted. The Solo LED flashes any time a channel is in PFL,
AFL or Solo in Place mode.
The dual, 10-segment, bi-color LED meters indicate input
level and clip status for the currently targeted or Soloed chan-
nel.
For Selected Channel metering scale, see "Selected Channel
Level Meters" on page 108.
Dynamics
The Dynamics section provides dedicated controls and meter-
ing for built-in and plug-in dynamics processors, including a
comprehensive set of Compressor/Limiter and Expander/Gate
controls.
Dynamics section and controls
See Chapter 16, "Dynamics."
EQ
The EQ section provides dedicated controls for all built-in and
compatible plug-in EQ parameters including band in/out, fre-
quency, Q, and mode.
EQ section and controls
See Chapter 17, "EQ."
Chapter 3: D-Show Profile Control Overview 31