Table of Contents
Advertisement
To re-initialize (reset) the racks:
In the Plug-In Racks Reset dialog, click Reset to begin the
1
plug-in rack re-initialization.
Resetting the plug-in racks
When this step is completed, the Plug-In Racks are Ready dia-
log appears alerting you that the plug-in racks are ready to be
re-activated.
Click Use Racks to confirm that you want the racks to be
2
re-initialized. Status is shown on-screen. After the process is
complete, the console and all plug-ins are operational again.
Reset Mix Engines
Use this option to do a full system reset in one step. Reset Mix
Engines resumes all operations automatically, including the
console, settings, and plug-in racks.
Audio may be interrupted or may change levels during
this reset procedure.
To reset the Mix Engines and all operations immediately:
Click Reset Mix Engines in the Ready to Resume dialog.
■
Operations are brought back online; no further interaction is
required (no warning or confirmation dialogs appear).
More Options
Additional options are provided to clear the console, or to run
DigiTest (hardware diagnostics).
To access additional options:
Click More Options.
■
After clicking More Options, a dialog is displayed that pro-
vides the following options.
Clear Console
Click Clear Console to reset all D-Show parameters on all
■
channels to their factory default settings.
Run DigiTest
DigiTest is hardware diagnostics software for D-Show. Only
use DigiTest at the request of a Digidesign technician to diag-
nose specific hardware problems.
Restarting D-Show
If D-Show ever needs to be restarted, do the following:
To restart D-Show:
Turn off all power amps or turn the volume down on all
1
monitoring equipment.
Press both Reset switches on the front of the FOH Rack si-
2
multaneously.
USB
FOH Link
Reset
Power
To Control Surface
Reset switches
Location of reset switches on FOH Rack
If restarting the system does not correct a problem, you may
have to reset other hardware components, identify and re-
move any incompatible plug-ins, or reinstall D-Show software
using the D-Show System Restore CD.
Additional Restart Options
Additional shortcuts are provided while restarting the system,
which let you do the following:
• Back up the current show settings and clear the console. Use
this option if you suspect an auto-saved setting has become
corrupted. This lets you save your most recent settings and
clear the console without having to a full system restore.
– or –
• Restart the D-Show processor but launch into Explorer, to
manually manage software components. Use this option if
to troubleshoot the system if problems arise early in the
startup process and persist through repeated restarts.
Backup and Clear Console
To backup and clear the console at restart:
Start or restart the system.
1
Watch the screen closely during the startup process. As soon
2
as the cursor becomes visible (and before the D-Show logo
screen appears) press and hold the C key on the computer key-
board. Continue to hold the C key (do not press it repeatedly).
A dialog appears that lets you choose to backup your
3
auto-saved settings and clear the console, or to continue and
load settings normally.
If you press the C key too early in the startup process, the
USB keyboard is reset instead of calling the Backup and
Clear dialog. If you do not see the backup and clear dialog,
repeat the restart process and try again.
Chapter 28: Troubleshooting 231
Advertisement
Table of Contents
