DigiDesign D-Show Profile Manual page 151

Go to the channel where you want to paste the settings.
2
Do one of the following:
3
• To paste a parametric EQ setting, right-click in the new
channel's EQ section or graph and choose Paste EQ Set-
tings.
– or –
• To paste a Graphic EQ setting, right-click in the new
channel's Graphic EQ section and choose Paste GEQ Set-
tings.
Presets for Built-In and Graphic EQ
D-Show lets you store and load EQ settings to disk as Preset
files. Presets can be used with built-in and plug-in EQ proces-
sors, including the graphic EQ. Preset files can be moved be-
tween systems and used for other Shows. Presets can be ac-
cessed from the control surface or on-screen.
To save or load a preset:
Adjust EQ parameters as needed.
1
Click the EQ Presets icon on-screen. (The Presets icon is
2
available in the Inputs screen EQ section, and in the graphic
EQ screen for an output channel).
Choose a Presets folder in the Folder display at the top of the
3
Presets window. If necessary, choose the appropriate Presets
folder by clicking and selecting it from the Folder pop-up
menu.
Check the Factory Presets folder for preconfigured settings.
For information about creating and transferring folders and
files, see Chapter 20, "Shows and File Management."
Presets window Presets icon
EQ Presets window
Do any of the following:
4
• To preview an existing preset, click its name in the Pre-
sets window.
• To load the currently selected preset, press Enter or click
the Close box in the Presets window title bar.
• To load a preset and close the Presets window, dou-
ble-click the preset.
• To save the current EQ settings as a new preset, click New
and enter a name for the preset file.
• To cancel without changing settings, click Cancel.
To save or load a preset for the Graphic EQ:
Go to the Outputs page for the channel on which the
1
graphic EQ is assigned. If necessary, click the 31-Band Graphic
Equalizer tab to display the graphic EQ on that channel.
Click the graphic EQ Presets icon (above the EQ bands, next
2
to the In-Circuit button).
Choose a Presets folder in the Folder display at the top of the
3
Presets window. If necessary, choose the appropriate Presets
folder by clicking and selecting it from the Folder pop-up
menu.
Do any of the following:
4
• To preview an existing preset, click its name in the Pre-
sets window.
• To load the currently selected preset, press Enter or click
the Close box in the Presets window title bar.
• To load a preset and close the Presets window, dou-
ble-click the preset.
• To save the current graphic EQ settings as a new preset,
click New and enter a name for the preset file.
• To cancel without changing settings, click Cancel.
Chapter 17: EQ 141