Table of Contents
Advertisement
Next Snapshot Indication in Status Display
The Snapshot Status display shows the currently targeted
(next) snapshot in red text directly above the display of the
last (most recently recalled) snapshot. Pressing the Snapshot
Recall button immediately recalls the targeted snapshot and
makes it the last recalled snapshot.
Next and Last Recalled snapshot display in the Status area
Snapshot Controls on the
D-Show Profile Control Surface
Snapshot controls appear in the Snapshots section. These con-
trols provide direct access to a few basic snapshot commands
and allow manual control of snapshot recall.
Snapshots Section
You can target (select), store, and recall snapshots from the
Snapshots controls in this section.
Store
Previous
Snapshot controls in the ACS Section
The Snapshot controls in the Snapshots section perform the
following functions:
Store Stores the current state of all console parameters in the
targeted snapshot. This switch mirrors the Store button in the
Snapshots page.
Recall Recalls the targeted snapshot. This switch mirrors the
Recall button in the Snapshots page.
Select Encoder and Display Turning the Select encoder scrolls
through and selects the targeted snapshot in the Snapshots
list. The 6-character display shows the name of the currently
targeted snapshot. A period is appended to the displayed
snapshot name to indicate whenever it has been edited since
being recalled.
Previous Instantly recalls the snapshot prior to the most re-
cently recalled snapshot. This switch mirrors the Recall Previ-
ous button in the Snapshots page.
174
D-Show Profile Guide
Next snapshot (red)
Most recently recalled
snapshot (green)
Select
Display and Encoder
Preview
Next Instantly recalls the snapshot immediately following the
most recently recalled snapshot. This switch mirrors the Re-
call Next button in the Snapshots page.
The Previous and Next switches combine target and recall
actions in one step, causing the next or previous snapshot
to be instantly active. These switches cannot be used to pre-
view snapshots before recalling them.
Preview Enables snapshot Preview mode. See "Preview Mode"
on page 185
Snapshots List
Snapshot Entries
Each entry in the Snapshots List has a number (001–999) and
name, along with icons for Lock and Enable status. If either
the MIDI Read or Generate feature is enabled, each snapshot
will also have a time code value, trigger indicator, or send in-
dicator.
Recall Buttons
The Recall Previous (–) and Recall Next (+) buttons at the top
of the Snapshots List cause the previous or next snapshot to be
targeted and recalled in one step.
Chase MTC
Recall
Enables or suspends automated recall of snapshots when ei-
Next
ther the MTC Read or MTC Generate options is enabled.
Navigating the Snapshots List
Snapshots are highlighted in color in the Snapshots list to in-
dicate the following:
Green Indicates the last recalled snapshot
Red Indicates the currently targeted snapshot
Yellow Indicates that the snapshot is both the last recalled
and currently targeted snapshot
Blue Indicates that the snapshot is part of a multiple snapshot
selection but not the last recalled or currently targeted snap-
shot. Recalled and Targeted snapshots can also be part of a
multiple selection in the list. In this case, the sequence num-
ber is blue while the rest of the name is red, green or yellow.
Advertisement
Table of Contents
