Chapter 6. C|24 Pro Tools Controls; Fader Section - DigiDesign C24 Manual

Chapter 6: C|24 Pro Tools Controls

Fader Section

Channel Strip
Automation
Mode
indicators
EQ switch
Insert switch
Input Monitor
switch
Channel Strip
Fader
Each channel has a touch-sensitive motorized
fader for controlling channel volume in Normal
mode and a wide range of parameters in Flip
mode. When you are automating a parameter
on a fader in Touch mode, touching the fader
Automation Mode
starts writing automation.
switch
Dyn switch
Mute Switch
Send switch
The Mute switch toggles mute status for the
channel. When a track is muted, its Mute switch
lights solid. When a track is implicitly muted
LCD display
(because another track is soloed), its Mute
switch flashes.
Rotary Encoder
Solo Switch
Encoder switch
Record Enable
The Solo switch toggles solo status for the chan-
switch
nel. When a channel is soloed, the Solo switch
Channel
lights, and the Mute switches on other channels
Select switch
in the session flash to indicate implicit mute.
Solo switch
The Solo switch function follows the Pro Tools
Mute switch
Solo Latch options (Latch, X-OR, and Momen-
tary).
Fader
Solo Safe Mode To solo safe a track, hold the
Command/Ctrl Modifier switch and press the
track's Solo switch. When a track is solo safed,
its Solo switch flashes once.
Chapter 6: C|24 Pro Tools Controls 37