Energy Accumulation - Applied Precision RS 2130 User Manual

Reference Standard RS 2x30, RS 1x30
User's Guide
MEASure:VALue:UI?
Request for aggregated result of voltages and currents.
MEASure:VALue:UIP?
Request for aggregated result of voltages, currents and phases.
MEASure:VALue:PUI?
Request for aggregated result of active powers, voltages and currents.
MEASure:VALue:PUIP?
Request for aggregated result of active powers, voltages, currents and phases.
MEASure:VALue:PQS?
Request for aggregated result of active, reactive and apparent powers.

5.9.7 Energy Accumulation

Device accumulates energy in three separate energy registers (one for active energy, one for reactive
energy and one for apparent energy). Each energy register is accumulating energy only for those
channels (L1, L2, L3) which are enabled for main (Fout0) impulse output in Measurement / Energy /
Impulse menu.
Energy accumulation can be started, stopped and reset by remote commands.
Reset (clearing of all energy registers) can be done also during accumulation (when it is running).
Reset can be done also manually from device keypad using functional (FUNC/SHIFT) key but only
when this functionality is enabled in Measurement / Energy / RESET -> menu item.
MEASure:ENERgy:STARt
Command for energy measurement start.
MEASure:ENERgy:STOP
Command for energy measurement stop.
MEASure:ENERgy:RESet
Command for energy measurement reset - energy registers are set to zero.
MEASure:ENERgy:STATus?
Request for status of energy measurement.
Answer is: 1 for running and 0 for stopped energy measurement.
MEASure:ENERgy:ACTive?
Request for actual value of active energy cumulated during energy measurement.
Answer is one number in VAs.
MEASure:ENERgy:ACTive:K?
Request for actual value of active energy cumulated during energy measurement.
Answer is one number in kVAh.
MEASure:ENERgy:REACtive?
Request for actual value of reactive energy cumulated during energy measurement.
Answer is one number in VArs.
MEASure:ENERgy:REACtive:K?
Request for actual value of reactive energy cumulated during energy measurement.
Answer is one number in kVArh.
MEASure:ENERgy:APParent?
Request for actual value of apparent energy cumulated during energy measurement.
Answer is one number in Ws.
MEASure:ENERgy:APParent:K?
Request for actual value of apparent energy cumulated during energy measurement.
Answer is one number in kWh.
www.appliedp.com 29
RS-UG91-EN