Fixed Channel
Remark: If the value is placed in parentheses, it is not considered, because the superior parameter is
most likely set into AUTO option.
Show History ->
State
Quantities
Integr. Time
Reset
State
COM1 ...
State
Format
Quantities ...
Quick Mode
Threshold
www.appliedp.com
- channel selection for fixed mode – one of 6 options (combinations L1 – L3 and
voltage, current). However, the previous parameter „Channel Mode" has to be
set to FIXED.
3.2.10 History Mode Menu
- display of historical statistics
- enabling or disabling the History function
- without the possibility of any change (all quantities)
- integration time is always equal to the value of TIME BASE, which is set in
Measurement Menu. INTEGR. TIME item does not allow to change its value.
- resetting the History records
3.2.11 Menu TALK ONLY
- enabling or disabling TALK ONLY Mode, which serves to continuous sending
of measured data to communication port
- to enter the settings of COM1 port in order to get more options of TALK ONLY
Mode
3.2.12 Menu TALK ONLY COM1
- enabling or disabling TALK ONLY Mode on COM1 port
- sent data format setting either to SHORT or LONG
- to enter the list of quantities where every single available quantity can be
selected in order to continuously send their values via COM1 port
3.2.13 Output Frequency Response Menu
- enabling or disabling the Quick Response Mode
- setting the threshold value in %
Reference Standard RS 2x30, RS 1x30
RS-UG91-EN
User's Guide
15