Input / Output User Port (Control Port) - Applied Precision RS 2130 User Manual

Key
ESC
OK
FUNC/SHIFT
PL_MN
DEL
INS
EXP
F6
F5
F4
F3
F2
F1
DOWN
Code is for direct press of key. Shift code is for press of key together with shift key.

5.4 Input / Output User Port (CONTROL PORT)

The device contains one input/output user port, which can be used for controlling external devices.
This port contains 4 input, 4 output, 4 dosage, 2 impulse and 1 ground signals.
It is possible remotely (via RS-232 interface) or locally (from the front menu of the device) to:
•
detect (read) values of input signals,
•
modify (set) values on output signals,
•
set initial states (values which will be set at the device start up) of output signals,
•
control dosage contacts using dosage function.
Control connector signals can be controlled by menu item System / Control Port or by remote
commands:
SYSTem:CONTrol:INPort?
Request for state of input signals. Answer is 0(=0000
SYSTem:CONTrol:OUTPort?
Request for set state of output signals. Answer is 0(=0000
SYSTem:CONTrol:OUTPort {<param>}
Setting of state of output signals. Parameter is 0(=0000
SYSTem:CONTrol:OUTPort:INIT?
Request for initial state of output signals. Answer is 0(=0000
SYSTem:CONTrol:OUTPort:INIT {<param>}
Setting of initial state of output signals. Parameters is 0(=0000
www.appliedp.com
Emulation codes:
Code Shift code
255 223
254 222
253 221
252 220
250 218
249 217
248 216
247 215
246 214
245 213
244 212
243 211
242 210
241 209
RS-UG91-EN
Reference Standard RS 2x30, RS 1x30
Key Code
UP 240
RIGHT 239
LEFT 238
NUMB_9 57
NUMB_8 56
NUMB_7 55
NUMB_6 54
NUMB_5 53
NUMB_4 52
NUMB_3 51
NUMB_2 50
NUMB_1 49
NUMB_0 48
POINT 46
) - 15(=1111 ). LSB is IN0.
B B
) - 15(=1111 ). LSB is OUT0.
B B
) - 15(=1111 ). LSB is OUT0.
B B
) - 15(=1111
B B
) - 15(=1111
B
User's Guide
Shift code
208
207
206
205
204
203
202
201
200
199
198
197
196
195
). LSB is OUT0.
). LSB is OUT0.
B
23