Table of Contents
Advertisement
Switching the Power Off
The following describes how to switch the power off.
Important • If the power is switched off, all the services of the machine will stop. When using the machine
Note
1
Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator does not blink.
Important • Do not switch the power off in the following situations. If the power is switched off, the processing
2
Press the push-button power switch to switch the power off.
Important • Power off processing is performed internally on the machine for a while after the power is switched
When the Finisher-B1 (optional) is installed.
Important • Power off processing is performed internally on the machine for a while after the power is switched
Note
throughout the day for jobs such as receiving fax, do not switch the power off.
• You can set the machine to be switched off automatically at the same time every day.
data may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
off. Therefore, do not switch the main power off immediately after switching the power off.
off. Therefore, do not switch the main power off immediately after switching the power off.
• When powering the machine on after it has been switched off, wait 10 seconds after the touch
screen has gone dark.
Power Source
2
47
Advertisement
Table of Contents
