Switching On/Off The Power - Fuji Xerox DocuColor 1256 GA Series Manual

Switching On/Off the Power

Switch on the power of the copier before you begin copying. After the copier is switched on,
it takes about 8 minutes and 30 seconds for it to warm up before you can start making
copies. Switch off the power of the copier at the end of the day, or when it will not be used
for a long time. You can make use of the Power Saver feature if the copier is left idling for a
while. The Power Saver feature reduces the power consumption of the machine, thereby
helps to conserve energy.
1.2.2 Saving energy

1.2.1 Switching on/off the power

I Switching on the power
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
G It takes more than three seconds for
the machine to warm up if you switch
on the machine immediately after it
has just been switched off.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Procedure
Turn the power switch to
the "|" (On) position.
The following screen will appear on the touch panel display for about 10
seconds.
If you have enabled the Auditron Mode, the User Password Entry screen will
be displayed.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
○ ○ ○ ○ ○ ○ ○
7