Set Final Target; Linked Targets - norbar NorTronic Series Operator's Manual

Set Final Torque Target
NOTE: This screen will only be shown if Angle Target is larger than '0' on the 'Set Angle' screen.
Set Final
N·m
298.4
Minimum =
•
0 (No Final Torque
If the
•
Final Target
value the
above Torque Target
Torque) Target.

Linked Targets

can only be
Linked Targets
The &
# of Tests Next Target
only be specified in the
Target.
can be sent via the
Linked Targets
or interface to the
USB wireless
Tool.
If after the
final target
completed (and no further target
has been specified), the last
is
Target enabled.
To carry on, link the
last Target
the
first.
Press
Press
The
Target),, Maximum =
value is set to 0, the Final Target is
setting, the
in
set up TDS.
can
TDS
has
to
or to change.
to confirm and go to
button is not functional.
®
NorTronic torque capacity.
disabled (Torque + Angle
is
Final Target enabled (Torque + Angle (with Final
Options Menu.
Target), if it is set to a
15