Exit Measure Display (Options Menu); Tds Receive Results Interface - norbar NorTronic Series Operator's Manual

Exit Measure Display (Options Menu)

Press to exit Measure. The Options Menu (shown below) is displayed.
TARGET
SET UP
DATA STORE
ABOUT

TDS Receive Results Interface

can be
Test Results sent
window using the
Results
Only tool can be interfaced at any
one
If the
USB
If the
wireless
connected to
After a
peak
Receive Results
sent during the
The button is
save
button is pressed,
window on
If a
Target
seconds) to
Press
Press
Press
as they happen (i.e. in
or interfaces.
USB wireless
one time.
interface is used, the USB
interface is used, the wireless
in
Receive Results
has been detected, press ZERO to
in TDS. If the tool is configured for
Hold Time.
(i.e.
inactive Test Results
will be sent via
Test Results
TDS.
is in use and a reading has been saved, press the UP button (and hold in for 2
the
delete last reading
or to change highlighted option.
to confirm.
to enter Measure.
time) from the NorTronic
real
will appear on the
icon
will
icon change
TDS.
both the peak
send
Auto
are saved on the NorTronic
NOT
or
USB wireless
that has been
output
tool to
®
TDS
of the display.
bottom left
from to when the tool is
Torque & Angle
Reset, the readings are automatically
). When the
®
to the
Receive Results
to in
"Receive Results"
via the
Receive
values to
TDS.
13