Designing a Target System
Pin relationship between 177-pin connector and QFP socket/adapter
Pin relationship between 177-pin connector and QFP
socket/adapter
For pin assignment of the 177-pin connector for each of the 112-, 144-, and
168-pin QFP socket adapter, see Chapter 9 "Specifications and
Characteristics."
Target interface
For electrical characteristics of the interface with the target system, see
Chapter 9 "Specifications and Characteristics."
Cautions in designing target systems
You should remember the followings when designing target systems.
•
For operating frequency and operating supply voltage:
Supported range for the processor operation is 4.0 to 33.3 MHz in
frequency and 5±0.25V in power. Processors that operate at 3.3 V
are not supported.
48