Table of Contents
Advertisement
Product Overview
Emulation controller
1. Power connector
2. DIP switches
3. RS-232 connector
4. LAN status LEDs
5. LAN connector (10BASE-T) Connects the LAN cable when the Emulator
6. LAN connector (10BASE2) Connects the LAN cable when the Emulator
4
Connects the power cable.
Connecting/disconnecting the power cable will
switch ON/OFF the emulator.
Configure the settings of the Emulator.
Instructions are printed on the bottom of the
emulation controller.
Connects the RS-232 cable to communicate with
the host computer via the serial connection.
Indicate the communication status of the
Emulator working on the LAN.
communicates with the host computer via
10BASE-T LAN.
communicates with the host computer via
10BASE2 LAN.
Advertisement
Table of Contents
