Table of Contents
Advertisement
Updating Firmware
To update firmware with "progflash"
choose one. (In the interactive mode, only one product at a time can be
updated.) You can abort the interactive progflash command by pressing
<CTRL>c.
progflash will print "Flash programming SUCCEEDED" and return 0 if it is
successful; otherwise, it will print "Flash programming FAILED" and return a
nonzero (error).
You can verify the update by displaying the firmware version information.
Example
To update the firmware in "myprobe", you could enter the following
command:
progflash -v myprobe E3472
97
Advertisement
Table of Contents
