Connecting to the Host Computer
To verify LAN communications
Setting Up a Serial Connection
To set up a serial connection, you will need to:
•
Set the serial configuration switches
•
Connect the HP E3472A/73A Emulator to the RS-232 interface
•
Connect a serial cable between the host computer and the
HP E3472A/73A Emulator
•
Verify communications
Serial connections on a workstation
You should not use a serial connection on a workstation, except to set
LAN parameters.
Serial connections on a PC
You should not use a serial connection on a PC, except to set LAN
parameters or to update the HP E3472A/73A firmware.
34