Setting The Operational Mode To 802.1X - Avaya 9608 Installing And Maintaining

Administrative
Procedure value
(in English)
SSON
TEST
VIEW
VPN
Note:
1. A 9608 and 9608G deskphone always lists the CONT procedure. Other color
deskphones list the CONT only if the deskphone has at least one button module
attached.
2. If the deskphone software has VPN and media encryption disabled, VPN will not
appear on the Craft procedures menu list. To determine if this applies to the
deskphone, go to the About Avaya IP Deskphone screen through the Avaya (A) Menu
or Home screen as applicable to the phone, and select the Settings list.
Related links
Using local Administrative Menu procedures

Setting the operational mode to 802.1X

About this task
Use the following procedure to set or change the operational mode.
Note:
When updating local Craft procedures from a touch screen deskphone, touching the line you
want to change or the applicable softkey produces the same result as selecting a line and
pressing the applicable softkey on a non-touch screen IP deskphone.
Procedure
1. When you select 802.1X from the Craft Procedures screen, the deskphone displays the
following:
Supplicant:
Pass-thru:
where the Supplicant line is the text string associated with the current system value of
DOT1XSTAT. The DOT1XSTAT parameter configures the 802.1X Supplicant Mode
operation control, defined as:
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Purpose
Set the Site-Specific Option Number
Initiate a self-test
View current parameter values and
file names
Administer and view Virtual Private
Network (VPN) settings
Comments on this document? infodev@avaya.com
Using local Administrative Menu procedures
See
Changing SSON settings
Performing a self-test
Using The VIEW craft procedure for
troubleshooting
VPN Setup Guide for 9600 Series IP
Telephones, 16-602968.
on page 36
Deskphones H.323
on page 55.
on page 55.
on page 70.
43