Table of Contents
Advertisement
12.5
Service menu
Configure display unit:
Single-range balance:
(example)
(example)
(example)
KDE-T-BA_IA-e-1210
Weighing scale is turned off
Press
and hold;
Keep holding
at the same time until software version "P1.0x" is
displayed. Release both keys.
"SCL.TYP"will appear briefly followed by "1.rAnGE".
Setting single range ("1.rAnGE") – or dual range
("2.rAnGE") weighing scale
to change between "1.rAnGE"and "2.rAnGE".
Press
Select „1.rAnGE" and confirm by
„bASUnt" is displayed. This is where you can set the required
weighing unit.
Press
to change between the individual units and
to select the required unit (ex. here: „kg").
press
"SCL.CAP" will appear briefly.
Setting weighing scale capacity
A numeric value appears and the digit on the right is
flashing.
Press
to increase the numeric value or
decrease. Press
place. Set weighing scale capacity (here is an example of
50 kg) and press
pressed down and also hold down
.
to change to a different decimal
to confirm.
to
44
Advertisement
Table of Contents
