Interface Parameters; Data Transfer Mode - KERN KDE-T Operating And Installation Instructions

8.3

Interface parameters

Data output via interface RS 232 C
General hints
The previous condition for the data transfer between balance and a peripherical
device (e.g. printer, PC ...) is that the appliances are set to the same interface
parameters (e.g. baud rate, transfer mode ...).

8.3.1 Data transfer mode


Turn on weighing scale by

and keep it pressed until „Unit" appears on the display.
Press

repeatedly until "Pr" appears
Press

Acknowledge using

Select desired setting by

Acknowledge selection by
31
and wait for zero to be displayed.
, the current setting is displayed.
(example)
.
. The balance returns to weighing mode.
KDE-T-BA_IA-e-1210