Table of Contents
Advertisement
(example)
Dual range balance:
(example)
45
"rESOLE"will appear briefly followed by a numeric value.
Now set readability. You can select between default values
that are dependent on the max load of the weighing scale.
Press
to change between values.
Press
to confirm the required value.
Here is an example:
- 0.002 kg - 0.005 kg – 0.010 kg – 0.020 kg –
0.001 kg
0.050 kg
"F" will appear briefly before the weighing scale changes to
adjusting mode and "CAL" will be displayed.
Linearize weighing scale (See chap.6.7.1)
Weighing scale is turned off
Press
and hold;
Keep holding
at the same time until software version "P1.0x" is
displayed. Release both keys.
"SCL.TYP"will appear briefly followed by "1.rAnGE".
Setting single range ("1.rAnGE") – or dual range
("2.rAnGE") weighing scale
to change between "1.rAnGE"and "2.rAnGE".
Press
Select „2.rAnGE" and confirm by
pressed down and also hold down
.
KDE-T-BA_IA-e-1210
Advertisement
Table of Contents
