Table of Contents
Advertisement
Turning off pre-tare function:
Unload weighing pan and press
repeatedly until „PrETArE" is displayed flashing
Press
Press
7.7
Plus/minus weighings
For example unit weight control, fabrication control etc.
Turn on weighing scale by
Put desired weight on weighing pan
to tare and "0.0000 kg" will be displayed
Press
Remove desired weight and the desired weight will be shown as negative value
Put the test objects subsequently on the weighing plate, the respective deviation
from the nominal weight is displayed with the respective sign to „+" and „-".
According to the same procedure also packages with the same weight can be
produced, referring to a nominal weight.
Back to weighing mode by pressing the
KDE-T-BA_IA-e-1210
to delete the saved pre-tare value.
and wait for zero to be displayed.
(example)
to set to zero
button.
16
Advertisement
Table of Contents
