General Safety Instructions; Terms And Symbols; Warnings - VTI Instruments EX1401 User Manual

VTI Instruments Corp.
G
Review the following safety precautions to avoid bodily injury and/or damage to the product. These
precautions must be observed during all phases of operation or service of this product. Failure to
comply with these precautions, or with specific warnings elsewhere in this manual, violates safety
standards of design, manufacture, and intended use of the product. Note that this product contains
no user serviceable parts or spare parts.
Service should only be performed by qualified personnel. Disconnect all power before servicing.
T S
ERMS AND YMBOLS
These terms may appear in this manual:
WARNING
CAUTION
These symbols may appear on the product:
W
ARNINGS
Follow these precautions to avoid injury or damage to the product:
Apply local earth ground
10
S
ENERAL AFETY
Indicates that a procedure or condition may cause bodily injury or death.
Indicates that a procedure or condition could possibly cause damage to equipment
or loss of data.
Attention and Warning - Important safety instructions, refer to manual
Warning, possibility of electric shock, refer to manual
Frame or chassis ground
Safety ground, required to be connected to local earth ground
Indicates that the product was manufactured after August 13, 2005. This mark is
placed in accordance with EN 50419, Marking of electrical and electronic
equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE).
End-of-life product can be returned to VTI by obtaining an RMA number. Fees
for take-back and recycling will apply if not prohibited by national law.
The safety earth ground cable provided with this instrument meets
the required regulatory and statutory safety standards as indicated by
this product's declaration of conformity. The green/yellow safety
cable must be applied between the safety ground on the rear of the
unit and the local safety earth ground. This is required for safe
operation of the equipment.
the safety earth ground cable.
I
NSTRUCTIONS
Refer to the manual
on how to apply
EX1401 Preface