Precor GEN06 Series Service Manual page 72

Tension and Tracking Adjustment" on page 45
17. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take-Up roller shaft (see
page).
18. Replace the end cap (see
page).
19. Replace the hood cover.
20. Verify treadmill operation (see ) and return to service.
.See Also
"Replacement Procedures" on page 48
"Adjustment Procedures" on page 39
"Running Belt and Deck Replacement" on page 81
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"End Cap & Belt Guard Cover Replacement" on the next
"End Cap & Belt Guard Cover Replacement" on the next
6 Replacement Procedures
Drive Roller Replacement
procedure.
Page 65