Precor GEN06 Series Service Manual page 32

INFORMATION DISPLAY
U-BOOT SW
U-BASE SW
METRICS BOARD SW
SER NUMBER
USAGE LOG
"Error Log & CPA Event Log"
on page 95
(1) Only available on ASL equipped models.
1
(2) TRM800-14 , TRM700-16 models
1
TRM800 version 2 treadmills mfg. dates 2014 and later.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
DESCRIPTION
Hrs).
The console Upper Boot software version information.
The console Upper Base software version information.
The console Metrics board software version information
Displays the model and serial number of the machine. The
base serial number can be set using the WinCSAFE com-
puter software. The factory default is NONE.
Displays the type of workout programs the users are
accessing most frequently.
Table of stored error event codes.
TIP: You can quickly access the Error log by holding down
the PAUSE key. Will show the STUCK KEY message
when there are no logged error codes.
4 Standard Service Menus
LED Console Standard Service Menus
Page 25