Precor GEN06 Series Service Manual page 17

Touchscreen Calibration: Follow screen prompts to complete test. When
l
the test is completed the console will automatically exit and return to the
System Tests menu.
Touchscreen Test: Verify that there is a trace created that follows your fin-
l
ger movement across the touchscreen surface. Select Finish to exit. move
your finger and verify that a trace follows
Backlight Test: Tests the display backlight brightness. Follow prompts to
l
complete test.
RGB Test: Touch the screen to cycle through the test colors: Red, Green,
l
Blue, White, & Black. Returns to the System Tests menu when completed.
Numeric Backlight Test: Tests the controls numeric display brightness.
l
Returns to the System Tests menu when completed.
Numeric Display Test: Tests the controls numeric display. Returns to the
l
System Tests menu.
2. Exit the Diagnostic Test menu. (press Back to exit & return to the banner screen)
Motion Controls Test
Verify the machine operation.
1. Select QUICKSTART to begin a manual workout and operate the treadmill at
least 5 minutes. While walking on the unit perform the following tests:
2. Operate the SPEED motion control from minimum to maximum range while veri-
fying the machine operation.
Make sure that the console SPEED paddle control operation is smooth
l
and working correctly.
Verify that the running belt can reach the maximum speed and then returns
l
to the minimum speed level.
Make sure that the running belt speed change is smooth and that there are
l
no unusual noises.
Verify that the console SPEED indicators and workout displays are show-
l
ing correct information.
3. Operate the INCLINE motion controls from minimum to maximum range while
verifying the machine operation.
Make sure that the console INCLINE paddle controls operation is smooth
l
and working correctly.
Verify that the running deck can reach the maximum incline and then return
l
to the minimum incline level.
Verify that the lift motor operation is smooth while changing the INCLINE
l
from minimum to maximum levels.
Verify that the console INCLINE level indicators and user workout displays
l
are showing correct information.
Running Belt Test
Verify the running belt alignment and tracking.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
3 Operation Verification
Operation Verification Tests
Page 10