Precor GEN06 Series Service Manual page 91

27. Repeat the process on walking on the right side of the belt.
28. Repeat the process walking on the left side of the belt.
NOTE: It may be necessary to override the treadmill auto-stop function.
29. Stop the treadmill and step off the belt.
30. Set the treadmill to the maximum speed and run for 3 minutes.
NOTE: This process helps to remove excess wax from the belt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
Running Belt and Deck Replacement
Page 84