Precor GEN06 Series Service Manual page 65

Tension and Tracking Adjustment" on page 45
16. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take-Up roller shaft, see
17. Replace the end cap, see
18. Replace the hood cover.
19. Verify treadmill operation per
.See Also
"Replacement Procedures" on page 48
"Adjustment Procedures" on page 39
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"End Cap & Belt Guard Cover Replacement" on page
"End Cap & Belt Guard Cover Replacement" on page
"Operation Verification" and return to service.
6 Replacement Procedures
Drive Belt Replacement
procedure.
66.
66.
Page 58