Table of Contents
Advertisement
Helix M1000 Q4 Mobile
Example 1
The Helix cannot send any wireless signals. Therefore, the slave Helix fixtures must always be connected
via a DMX signal cable.
The Helix M1000 Q4 Mobile is only a W-DMX receiver and never
a W-DMX transmitter
When the Helix operates in DMX or Slave mode, it can receive a wireless DMX signal (CH1–512) and at
the same time it can also send a DMX signal, via its DMX output (05), through a DMX cable.
Fig. 13
Ordercode: 43740
17
Advertisement
Table of Contents
