Dimmer Speed; Dmx Fail; Working Time - SHOWTEC Helix M1000 Q4 Mobile Manual

Helix M1000 Q4 Mobile

6.2. Dimmer Speed

With this menu you can set the dimmer speed.
01) Press the UP/DOWN buttons to select FAST or SMOOTH.
02) Press the SET button to confirm your choice.

6.3. DMX Fail

With this menu you can set the device's behavior in case of a DMX failure.
01) Press the UP/DOWN buttons to select one of the 4 options:
● OFF: The device will black out the light output
● HOLD: The device will use last properly received DMX signal, ensuring undisrupted performance
● MANUAL: The device will switch to Manual mode
● PROGRAM: The device will run the built-in programs
02) Press the SET button to confirm your choice.

6.4. Working Time

With this menu you can set the working time of the Helix.
01) Press the UP/DOWN buttons to select one of the 16 options:
● OFF: Turns off the working time setting and the device runs at maximum power, until the battery
is depleted.
● 1–15H: Unit working hours, that means limited power operation based on current battery
capacity.
Ordercode: 43740 29