Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Mirrorball 30 cm • User manual •...
Page 4
The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely • (preferably in the original packing material), and return it to your Showtec dealer for service.
Mirrorball 30 cm Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. • The maximum ambient temperature t = 40°C must never be exceeded. •...
Mirrorball 30 cm Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Mirrorball 30 cm Description of the device Features The Mirrorball 30 cm should be used with a mirror ball control system (604081/604083). • Dimensions: ø 30 cm • Weight: 2,1 kg Optional accessories 42402 – LED Pinspot (silver) 42403 – LED Pinspot (black) 604081 –...
Mirrorball 30 cm Installation Remove all packing materials from the Mirrorball 30 cm. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The motor. Return the device to your dealer. 03) The mirror ball. Return the Mirrorball to your Showtec dealer. 04) If all appears to be O.K., plug the unit in again.
Mirrorball 30 cm Product Specifications Model: Showtec Mirrorball 30 cm Dimensions: ø 30 cm Weight: 2,1 kg Max. ambient temperature t -5°C-40°C Max. housing temperature t 80°C Design and product specifications are subject to change without prior notice. www.Showtec.info Website: service@highlite.nl...