Table of Contents
Advertisement
Figure 13.
System Status Page
Establishing or changing system or port settings
The
page is used to initially configure or change the configuration of the
System Settings
IPL T CR48. You may be required to change system settings if your network changes or if
port settings change as you add or change display devices or switchers.
To configure system or port settings:
1.
Select the
Configuration
displayed.
Figure 14.
System Settings Page
2.
Make changes to the IP settings or the date and time settings, as necessary.
3.
Click
to enter the changes or click
Submit
4.
Click
on the menu (on the left side of the window) and the
Port Settings
page is displayed (see
Settings
tab and the
System Settings
to revert to the previous settings.
Cancel
figure 15
on the next page) .
IPL T CR48 • Communication and Control
page (see figure 14) is
Port
18
Advertisement
Table of Contents
