Extron electronics IP Link IPL T CR48 User Manual page 23

4. Write down your current IP address and subnet mask below. If your PC is set to
address
an IP automatically
IP Address:
. . .
Subnet Mask:
. . .
5. Click
Specify an IP address
on your operating system) and leave the default gateway blank. Enter the following
values:
• IP Address: 192.168.254.253
Subnet Mask: 255.255.0.0
•
6. Save the changes and exit the network setup.
7. Reboot the PC, if required, for the changes to become effective.
8. Launch your web browser (Internet Explorer), and type
http://192.168.254.254/index.html
The IPL T CR48 default web page is displayed. See
Configuration on page 13 for more information on configuring your unit).
9. After configuring your IPL T CR48, repeat steps 3 and 4 to change your TCP/IP settings
back to their original configuration.
Firmware upgrades
Firmware upgrades become available as improvements are made to the versatility and
functionality of the IPL T CR48. These upgrade are available for download from at
www.extron.com (see Upgrading the firmware
upgrading the firmware).
, make a note of that, instead.
or
Use the following IP address
in the field of the browser.
Address
IPL T CR48 Interface
on page 21 for more information on
IPL T CR48 • Connection and Configuration
Obtain
(depending
15