Table of Contents
Advertisement
Built-in multi-level security
•
unit. Two levels of password protection provide appropriate security.
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of a reset to factory defaults, the
passwords revert to no password (see
page 19 to change a password).
•
Contact closure input ports
been activated
Supports Ethernet device drivers
•
AV devices
NOTE: Ethernet driver support requires Global Configurator 3.0 and firmware
version 1.15 or higher.
•
Easily connected
Provides RJ-45 auto-sense 10/100 Mbps Ethernet LAN
—
connection
•
Easily configured and controlled
•
Using a standard web browser (Microsoft
and web-based interface
•
Using a standard Telnet client application
Requires no centralized processor to operate within a system
•
•
Choice of mounting options
projector lift or on a rack shelf
Remote management
•
deactivate projector lifts, screens, and lighting systems.
Multiple protocols supported
•
and DHCP.
You can control the access to devices attached to the
—
Setting and changing passwords
Can be used to sense when a switch or relay has
—
Allows for control of up to six Ethernet-enabled
—
—
Internet Explorer
®
The controller can be mounted near a screen or
—
The IPL T CR48 allows you to remotely activate and
—
The IPL T CR48 supports Telnet, SMTP, ICMP, ARP,
—
on
version 6.0 or higher)
®
IPL T CR48 • Introduction
2
Advertisement
Table of Contents
