Actions Menu; Reboot; Restore - Crestron TSW-560 Supplemental Manual

Actions Menu

The configuration interface provides an Actions drop-down menu on the top right of the
page. The Actions menu can be accessed at any time.
Actions Menu
NOTE:
changes to a Save Changes button. Click Save Changes to save changes to the
configuration settings. If a reboot is required after changes have been saved, a pop-up
window displays asking whether the reboot should be performed. Select Yes to reboot the
device or No to cancel the reboot.
The Actions menu provides the following selections.

Reboot

Click Reboot to reboot the touch screen (After selecting Reboot, a pop-up window
displays confirming whether the touch screen should be rebooted. Select Yes to reboot the
device or No to cancel the reboot.)
NOTE:
rebooted. If the touch screen needs to reboot, the configuration interface displays a
message indicating that the touch screen must be rebooted for the settings to take effect.

Restore

Click Restore to restore the touch screen configuration settings to their default values. After
Restore is selected, a pop-up window displays confirming whether the application settings
should be restored. Select Yes to restore the settings or No to cancel the restore.
20 • TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens
Once any changes have been made to the configuration, the Actions button
Some configuration settings do not take effect until the touch screen has been
Supplemental Guide – DOC. 7927F