Cloud Settings; Configure Date/Time - Crestron TSW-560 Supplemental Manual

Cloud Settings

Click the Cloud Settings tab to configure a connection between the touch screen and the
Crestron XiO Cloud service. The default setting is Cloud Configuration Service Connection
enabled.
NOTE:
is 2.000.0051.
Settings - Cloud Settings
Click the Cloud Configuration Service Connection button to enable or disable a
connection between the touch screen and the Crestron XiO Cloud service. For more
information on connecting to the Crestron XiO Cloud service, refer to "Connecting to
Crestron XiO Cloud Service" on page 45.

Configure Date/Time

Click the Configure Date/Time tab to configure date and time settings for the touch screen.
Settings - Configure Date/Time
The following Configure Date/Time settings can be configured:
Time Synchronization
•
•
After an SNTP server has been entered in the Time Server text box, click Synchronize
Now to synchronize the touch screen date and time with the SNTP server. Time
synchronization can take up to two minutes to complete.
30 • TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens
The minimum firmware version required for the touch screen support of this feature
Enable Time Synchronization: Turns using SNTP (Simple Network Time Protocol)
to synchronize time to set the date and time on or off (Click the Enable Time
Synchronization button to toggle between turning time synchronization on or off.)
Time Server: Sets the SNTP server used to synchronize the date and time for the
touch screen
Supplemental Guide – DOC. 7927F