Crestron TSW-560 Supplemental Manual page 8

Static IP Ethernet Setup Screen
To edit the static IP address, the static subnet mask, the static default router, the preferred
DNS, or the alternate preferred DNS, tap the text field underneath the setting name. The
on-screen numeric keypad (not shown) opens.
•
•
•
•
After new settings have been saved, tap Apply Changes on the Static IP Ethernet Setup
screen to apply the new settings and to stay in setup mode. Tap Reboot to exit setup
mode and to reboot the touch screen.
•
•
4 • TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens
Use the keypad to make the new entry.
Tap the clear button (
Tap the delete button (
Tap Save to save a new entry or tap < Cancel to discard any changes. The display
returns to the Static IP Ethernet Setup screen.
If no changes are made, tap < Back to return to the Ethernet Setup screen.
Tap < Back again to return to the Setup screen.
) in the text field to clear any previous entry.
) to delete the last digit.
Supplemental Guide – DOC. 7927F