Crestron TSW-560 Supplemental Manual page 31

The following System Setup settings can be configured:
Network
NOTE:
only used if DHCP is set to "Disabled."
The following System Setup > Network settings can be configured:
•
•
•
•
•
•
•
•
Device Display
•
Supplemental Guide – DOC. 7927F
The Domain Name, IP Address, Subnet Mask, and Default Gateway fields are
Host Name: Sets the touch screen hostname
Domain Name: Sets the fully-qualified domain name on the network, consisting of
the hostname and the DNS suffix
Primary Static DNS: The primary DNS (domain name server) address used to
resolve the touch screen domain name to an IP address
Secondary Static DNS: The secondary DNS address used to resolve the touch
screen domain name to an IP address if the primary DNS fails
DHCP: Enables or disables using DHCP (Click the DHCP button to toggle between
enabling and disabling DHCP. If DHCP is enabled, IP does not function until a reply
has been received from the server. The touch screen broadcasts requests for an IP
address periodically.)
IP Address: Sets the IP address of the touch screen on the network. (Valid IP
addresses consist of four octets, 0 to 255, separated by periods.)
Subnet Mask: Sets the subnet mask address of the touch screen on the network
Default Gateway: Sets the gateway router address on the network
LCD
Auto Brightness: Turns automatic brightness control on or off for the touch
o
screen LCD
ALS Threshold Value: If Auto Brightness is enabled, sets the ALS (ambient
o
light sensor) threshold value for switching between high and low auto-
brightness presets
Brightness: If Auto Brightness is disabled, sets the touch screen LCD
o
brightness value
Brightness High Preset: Selects the touch screen LCD high brightness preset
o
value
Brightness Medium Preset: Selects the touch screen LCD medium brightness
o
preset value
Brightness Low Preset: Selects the touch screen LCD low brightness preset
o
value
TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens • 27